Microvetro Bi Polyurethane Satin Sealer

£104.00 Ex Vat

Microvetro Bi Polyurethane Sealer 30 Gloss, 

2 component

So you are buying part A 2.5L and part B 600ml

Ideal for floors and showers to give a waterproof protection

Can be used on top of plasma 3D, bi plasma, monolite, infinito, volare and moquette, and many other products.

Comes in 30 gloss(matt sheen), lucido (gloss), opaco (opaque).

 

1 in stock

Description

Microvetro Bi Polyurethane Satin Sealer

2 component

So you are buying part A 2.5L and part B 500ml

Ideal for floors and showers to give a waterproof protection

Can be used on top of plasma 3D, bi plasma, monolite, infinito, volare and moquette, and many other products.

Comes in 30 gloss(matt sheen), lucido (gloss), opaco (opaque).

Depending on the amount of Part B you mix depends on the strength gloss-

Catalys ratio-

Microvetro BI Lucido (polished): mix component part A with part B at 24% and with water at 10%.

2.5L of Lucido part A mix 24% of part B which is 600ml = 3.1L and 10% of water which you add 310ml

Microvetro BI 30 gloss (sheen):  mix component A with B at 20% and with water at 10%

2.5L of 30 Gloss part A mix 20% of part B which is 500ml =3L and 10% of water which you add 300ml

Microvetro BI Opaco (matte) : mix component A with B at 10% and 20% water

2.5L of Opaco part A mix 10% of part B which is 250ml = 2.75L plus 20% of water which you add 550ml

 Wait  2-3 minutes before the application

Apply the product with the roller in a quantity enough to cover the surface; apply a last roll on the surface in light way, without pressure to avoid bubbles; do not pass again on the already spread out clear, minimizing the overlaps with the purpose to reduce the formation of shades in phase of drying. The film of varnish is white milky, but drying it becomes perfectly becomes transparent and polish.

We recommend 1 coat on walls

3 coats in Showers/wetrooms and high traffic floors

Microvetro Bi Polyurethane Satin Sealer

Yield- 10sq per L per coat 

3L = 30m2 for 1 coat or 10m2 for 3 coats

We recommend to only mix what you will use for each  coat as to not to waste product,

With being a 2 component this cannot be used at a later date if part A & part B have been mixed together.

More information on our monolith microcement courses pop over to our sister website- https://italianostucco.co.uk/monolith-introductory-microcement-course/

 

 

Additional information

Weight 4 kg

Reviews

There are no reviews yet.

Be the first to review “Microvetro Bi Polyurethane Satin Sealer”

Your email address will not be published.

You may also like…