Description
Microvetro Bi Polyurethane Gloss Sealer
2 component
So you are buying part A 2.5L and part B 600ml
Ideal for floors and showers to give a waterproof protection
Can be used on top of micro cements and venetian plaster like – plasma 3D, bi plasma, monolith, infinito, volare and moquette, and many other products.
Comes in 30 gloss(matt sheen), lucido (gloss), opaco (opaque).
Depending on the amount of Part B you mix depends on the strength gloss-
Catalys ratio-
Microvetro BI Lucido (gloss): mix component part A with part B at 24% and with water at 10%.
2.5L of Lucido part A mix 24% of part B which is 600ml = 3.1L and 10% of water which you add 310ml
Microvetro BI 30 gloss (satin): mix component A with B at 20% and with water at 10%
2.5L of 30 Gloss part A mix 20% of part B which is 500ml =3L and 10% of water which you add 300ml
Microvetro BI Opaco (matt) : mix component A with B at 10% and 20% water
2.5L of Opaco part A mix 10% of part B which is 250ml = 2.75L plus 20% of water which you add 550ml
Wait 2-3 minutes before the application
Apply the product with the roller in a quantity enough to cover the surface; apply a last roll on the surface in light way, without pressure to avoid bubbles; do not pass again on the already spread out clear, minimizing the overlaps with the purpose to reduce the formation of shades in phase of drying. The film of varnish is white milky, but drying it becomes perfectly becomes transparent and polish.
We recommend 1 coat on walls
3 coats in Showers/wetrooms and high traffic floors
Microvetro Bi Polyurethane Gloss Sealer
Yield- 10sq per L per coat
3L = 30m2 for 1 coat or 10m2 for 3 coats
We recommend to only mix what you will use for each coat as to not to waste product, as with being a 2 component this cannot be used at a later date if part A & part B have been mixed together.
More information on our monolith microcement courses pop over to our sister website- https://italianostucco.co.uk/monolith-introductory-microcement-course/
Reviews
There are no reviews yet.