Description
The product gives a polished finish.
For internal use only.
Can be used with any acrylic product/plaster including our PLASMA 3D range
Cristallo Liquido Sealer
A protective clear coat for acrylic products
The sealer is applied with a Trowel, to purchase Trowel’s or any faux finishing tools please visit http://www.marmorinotools.co
Anymore questions please get in contact and we will be happy to help https://loggiaproducts.wpengine.com/contact/
WARNINGS
The temperature of the room must not fall below 20° C and the relative humidity must not exceed 50%:
These conditions must last for sufficient time for the glazing to dry out completely otherwise the clear may become opaque.
– The product, once catalyzed, has a pot life time of about 45 minutes;
If you continue to use the glazing agent after this time you risk having an opaque film instead of a glossy one.
In case the aforementioned drawbacks have occurred, and the glazing is opaque, it is possible to remedy by another coat,
After waiting a few days to allow the moisture to evaporate, possibly heating the room, after sanding the surface with very fine paper
– Before washing the floor with water, try to clean a small part of the surface with a damp cloth, checking that there are no streaks or opacity,
in fact the process of hardening of the epoxy continues to take place for a long time (1 – 2 months) and the water may cause it to opacify.
Reviews
There are no reviews yet.