Fissacril – Pre Primer for walls

£10.00£26.00 Ex Vat

Description

 

Fissacril – Pre Primer for walls

FISSACRIL is a water-based fixative for interior and exterior use, formulated with acrylic emulsions.

This primer penetrates into the plaster and seals the porous surfaces by bonding unrelated parts of them.

It provides both a good vapour permeability and also an excellent adhesion for finish coatings 

Making surface absorption is uniform, FISSACRIL allows colour uniformity throughout the application of paints/Venetian plasters

It is recommended for interior application on plasters and stucco and for exterior use on suitably prepared masonry walls and concrete, and newly fresh plaster

SURFACE PREPERATION

Interior new surfaces: All surfaces must be dry and cured according to the supplier’s recommendations – usually about 30 days.

Rough surfaces can be filled with putty FLYSTUK to provide a smooth surface; Ensure the support to be coated is clean with dust and dirt removed.

Apply one coat of primer FISSACRIL followed after 4/6 hours by two coats of wall paint.

For the application please refer to the technical methods given below.

Interior coated surfaces:

If you have any mildew this should be removed before painting by washing with a solution,

Mixed with 1 part liquid bleach and 3 parts water.

Apply the solution and scrub the mildewed area.

It requires the use of proper protective equipment. Existing peeled paint should be scraped and sanded to a sound surface.

Glossy surfaces should be sanded dull. Coatings in a poor condition should be removed completely.

Fill cracks and holes with putty FLYSTUK, once it is dry sand down to create a smooth surface.

Remove all sanding dust. Apply one coat of primer FISSACRIL followed after 4/6 hours by two coats of wall paint.

For the application please refer to the technical methods given below

Warning: Do not paint in direct sun or on a hot surface. Do not apply to wet surfaces.

Fissacril – Pre Primer for walls

PRODUCT APPLICATION

Brush: Use a nylon/polyester or a natural bristle brush. Roller: Use a nap synthetic or lamb’s wool roller cover.

Dilution depends on surface absorption. It ranges from 1:1 to 1:3 by volume with water.

Dilution depends on the airless system in use.

To make sure you have no problems in applying a trial application is strongly recommended prior to the commencement of work.

Warning: The addition of fixative to paints can not be considered as a substitute for the application of the fixative itself.

Only in the latter case, the fixative penetrates deep into the plaster and allows to standardize the absorption by sealing not consolidated parts of it.

The addition of fixative to paints, in fact, increases its resin content, but will not prevent such defects.

Temperature of application: +5 – +35ºC

Relative humidity of application: <85%

Touch dry: 30 MINUTES

Recoatable after: 4 -5 HOURS

Completely Cured: 7 DAYS

Cleaning tools: BY WATER

Coverage: 8-10 m2/L

Colour:clear

Gloss Levels: Translucent

If you are interested in learning more about our range of products we have available, why not attend one of our courses ?

We are based in Southport and offer 2 days to 5 day courses – Learn More 

page2image66349184 page2image66406848 page2image66191360 page2image66191552page2image66191744 page2image66191936 page2image66192128 page2image66192320page2image66192512 page2image66192704 page2image66192896 page2image66193088page2image66193280 page2image66193472 page2image66193664 page2image66193856page2image66194048 page2image66194240

 

You may also like…